Data Transfer Modes
AIM allows you to asynchronously mirror disks to remote storage servers using Internet protocols ( IP). AIM allows either of two options for transferring data: File Transfer Protocol (FTP) or Server Message Block (SMB), which uses common Windows File Sharing.
In order to transfer data from the source buffers to the destination buffers, a transfer mode utility must be set up prior to using AIM.
File Transfer Protocol (FTP)
-
Best for data transfer over long distances (WAN).
-
Uses File Transfer Protocols (in this case Microsoft’s IIS FTP component on the AIM destination) to move AIM files between the source and destination.
Refer to Using FTP Transfer Mode for additional instructions.
Server Message Block (SMB)
-
Best for transfers on a LAN or Virtual Private Network (VPN).
-
Uses network shares to move AIM files between the source and destination.
-
Use only if the source and destination servers are in the same LAN or VPN. (Servers on remote LANs can be accessed through the Internet using PPTP networking protocol.)
Refer to Using SMB Transfer Mode for additional instructions.
The steps to set up either transfer mode need to be completed before the data transfer mode is selected during the assignment of the destination server detailed in Configuring Destination Servers.